diff --git a/files/kamp/KAMP_Settings.cfg b/files/kamp/KAMP_Settings.cfg
index d2ac515..ddf8940 100644
--- a/files/kamp/KAMP_Settings.cfg
+++ b/files/kamp/KAMP_Settings.cfg
@@ -2,15 +2,14 @@
 # KAMP Settings
 ###########################################
 
-# Below you can enable or disable specific configuration files depending on what you want KAMP to do:
-
+# Do not touch this section below:
+[respond]                            # Necessary to receive messages from KAMP
 [include Start_Print.cfg]            # START_PRINT macro for Creality K1 Series.
 [include Adaptive_Meshing.cfg]       # Adaptive Meshing configurations.
 [include Line_Purge.cfg]             # Adaptive Line Purging configurations.
 [include Smart_Park.cfg]             # Smart Park feature, which parks the printhead near the print area for final heating.
 #[include Prusa_Slicer.cfg]           # Enable this if you use Prusa Slicer, it's the necessary macros to enable Exclude Objects functionality.
 
-[respond]                                   # Necessary to receive messages from KAMP
 
 [gcode_macro _KAMP_Settings]
 description: This macro contains all adjustable settings for KAMP
@@ -19,20 +18,20 @@ description: This macro contains all adjustable settings for KAMP
 
 variable_verbose_enable: True               # Set to True to enable KAMP information output when running. This is useful for debugging.
 
-# The following variables are for adjusting Adaptive Meshing settings for KAMP:
+# The following variables are for adjusting Adaptive Bed Mesh settings:
 
-variable_mesh_margin: 0                     # Expands the mesh size in millimeters if desired. Leave at 0 to disable.
-variable_fuzz_amount: 0                     # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Leave at 0 to disable.
+variable_mesh_margin: 0                     # Expands the mesh size in millimeters if desired. Default is 0 (disabled).
+variable_fuzz_amount: 0                     # Slightly randomizes mesh points to spread out wear from nozzle-based probes. Default is 0 (disabled). The maximum recommended value is 3.
 
-# The following variables are for adjusting Adaptive Line Purging settings for KAMP:
+# The following variables are for adjusting Adaptive Purge Line settings:
 
 variable_purge_height: 0.8                  # Z position of nozzle during purge. Default is 0.8.
-variable_tip_distance: 0                    # Distance between tip of filament and nozzle before purge. Should be similar to PRINT_END final retract amount. Default is 0.
+variable_tip_distance: 0                    # Distance between tip of filament and nozzle before purge. Default is 0.
 variable_purge_margin: 10                   # Distance the purge will be in front of the print area. Default is 10.
 variable_purge_amount: 50                   # Amount of filament to be purged prior to printing. Default is 50.
 variable_flow_rate: 12                      # Flow rate of purge in mm3/s. Default is 12.
 
-# The following variables are for adjusting the Smart Park feature for KAMP, which will park the printhead near the print area at a specified height:
+# The following variables are for adjusting Smart Park feature, which will park the printhead near the print area at a specified height:
 
 variable_smart_park_height: 10              # Z position for Smart Park. Default is 10.