diff --git a/files/guppy-screen/guppy_update.cfg b/files/guppy-screen/guppy_update.cfg
index a82f4ed..708ad68 100644
--- a/files/guppy-screen/guppy_update.cfg
+++ b/files/guppy-screen/guppy_update.cfg
@@ -32,6 +32,6 @@ gcode:
   SHAPER_CALIBRATE
   M400
   {% if printer["configfile"].config["temperature_fan soc_fan"] %}
-    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=50
+    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=45
   {% endif %}
   CXSAVE_CONFIG
\ No newline at end of file
diff --git a/files/improved-shapers/improved-shapers.cfg b/files/improved-shapers/improved-shapers.cfg
index 3da812a..db570ec 100644
--- a/files/improved-shapers/improved-shapers.cfg
+++ b/files/improved-shapers/improved-shapers.cfg
@@ -45,7 +45,7 @@ gcode:
   SHAPER_CALIBRATE
   M400
   {% if printer["configfile"].config["temperature_fan soc_fan"] %}
-    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=50
+    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=45
   {% endif %}
   RUN_SHELL_COMMAND CMD=delete_csv
   RESPOND TYPE=command MSG="Input Shaper Calibration complete!"
@@ -78,7 +78,7 @@ gcode:
   RUN_SHELL_COMMAND CMD=resonance_graph PARAMS="/tmp/resonances_y_y.csv -o {y_png}"
   RESPOND TYPE=command MSG="Y Graph (resonances_y.png) is now available in /Helper-Script/improved-shapers folder."
   {% if printer["configfile"].config["temperature_fan soc_fan"] %}
-    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=50
+    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=45
   {% endif %}
   RUN_SHELL_COMMAND CMD=delete_csv
   RESPOND TYPE=command MSG="Resonances Test complete!"
@@ -109,7 +109,7 @@ gcode:
   RUN_SHELL_COMMAND CMD=belts_graph PARAMS="-w {png_width} -l {png_height} -n -o {png_out_path} -k /usr/share/klipper /tmp/raw_data_axis=1.000,-1.000_a.csv /tmp/raw_data_axis=1.000,1.000_b.csv"
   RESPOND TYPE=command MSG="Graph (belts_calibration.png) is now available in /Helper-Script/improved-shapers folder."
   {% if printer["configfile"].config["temperature_fan soc_fan"] %}
-    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=50
+    SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=45
   {% endif %}
   RUN_SHELL_COMMAND CMD=delete_csv
   RESPOND TYPE=command MSG="Belts Shaper Calibration complete!"
diff --git a/files/kamp/Start_Print-3v3.cfg b/files/kamp/Start_Print-3v3.cfg
index 1911653..5fee47f 100644
--- a/files/kamp/Start_Print-3v3.cfg
+++ b/files/kamp/Start_Print-3v3.cfg
@@ -85,7 +85,7 @@ gcode:
   SET_GCODE_VARIABLE MACRO=M106 VARIABLE=user_flag VALUE=0
   WAIT_TEMP_END
   CLEAR_PAUSE
-  SET_TEMPERATURE_FAN_TARGET temperature_fan=soc_fan target=5
+  SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=30
   {% set g28_extruder_temp = printer.custom_macro.g28_ext_temp %}
   {% set bed_temp = printer.custom_macro.default_bed_temp %}
   {% set extruder_temp = printer.custom_macro.default_extruder_temp %}
diff --git a/files/macros/fans-control.cfg b/files/macros/fans-control.cfg
index 4e3fdac..4753f6f 100644
--- a/files/macros/fans-control.cfg
+++ b/files/macros/fans-control.cfg
@@ -36,7 +36,7 @@ min_temp: 0
 max_temp: 100
 control: watermark
 max_delta: 2
-target_temp: 50.0
+target_temp: 45.0
 max_speed: 1.0
 min_speed: 0.0
 tachometer_pin:PC6
diff --git a/files/macros/useful-macros-3v3.cfg b/files/macros/useful-macros-3v3.cfg
index 2d088b0..66c9594 100644
--- a/files/macros/useful-macros-3v3.cfg
+++ b/files/macros/useful-macros-3v3.cfg
@@ -116,7 +116,7 @@ gcode:
     {% set nozzle_clear_temp = params.EXTRUDER_TEMP %}
   {% endif %}
   SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
-  SET_TEMPERATURE_FAN_TARGET temperature_fan=soc_fan target=5
+  SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=30
   M109 S140
   {% if printer.toolhead.homed_axes != "xyz" %}
     G28
@@ -131,7 +131,7 @@ gcode:
   {% set x_park = printer.toolhead.axis_maximum.x|float - 10.0 %}
   G1 Z50 F3600
   TURN_OFF_HEATERS
-  SET_TEMPERATURE_FAN_TARGET temperature_fan=soc_fan target=45
+  SET_TEMPERATURE_FAN_TARGET TEMPERATURE_FAN=soc_fan TARGET=45
   SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1