First commit

scripts/kamp.sh

@@ -0,0 +1,126 @@
+#!/bin/sh
+
+set -e
+
+function kamp_message(){
+  top_line
+  title 'Klipper Adaptive Meshing & Purging' "${yellow}"
+  inner_line
+  hr
+  echo -e " │ ${cyan}KAMP is an extension that allows to generate a mesh and      ${white}│"
+  echo -e " │ ${cyan}purge line only in the area you really need it.              ${white}│"
+  hr
+  bottom_line
+}
+
+function install_kamp(){
+  kamp_message
+  local yn
+  while true; do
+    install_msg "Klipper Adaptive Meshing & Purging" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        if [ -d "$HS_CONFIG_FOLDER"/KAMP ]; then
+          rm -rf "$HS_CONFIG_FOLDER"/KAMP
+        fi
+        if [ -f "$HS_CONFIG_FOLDER"/KAMP_Settings.cfg ]; then
+          rm -f "$HS_CONFIG_FOLDER"/KAMP_Settings.cfg
+        fi
+        echo -e "Info: Creating directories..."
+        if [ ! -d "$HS_CONFIG_FOLDER" ]; then
+          mkdir -p "$HS_CONFIG_FOLDER"
+        fi
+        mkdir -p "$HS_CONFIG_FOLDER"/KAMP
+        echo -e "Info: Linking files..."
+        ln -sf "$KAMP_URL"/Adaptive_Meshing.cfg "$KAMP_FOLDER"/Adaptive_Meshing.cfg
+        ln -sf "$KAMP_URL"/Line_Purge.cfg "$KAMP_FOLDER"/Line_Purge.cfg
+        ln -sf "$KAMP_URL"/Prusa_Slicer.cfg "$KAMP_FOLDER"/Prusa_Slicer.cfg
+        ln -sf "$KAMP_URL"/Smart_Park.cfg "$KAMP_FOLDER"/Smart_Park.cfg
+        ln -sf "$KAMP_URL"/Start_Print.cfg "$KAMP_FOLDER"/Start_Print.cfg
+        cp "$KAMP_URL"/KAMP_Settings.cfg "$KAMP_FOLDER"/KAMP_Settings.cfg
+        if grep -q "include Helper-Script/KAMP/KAMP_Settings" "$PRINTER_CFG" ; then
+          echo -e "Info: KAMP configurations are already enabled in printer.cfg file..."
+        else
+          echo -e "Info: Adding KAMP configurations in printer.cfg file..."
+          sed -i '/\[include printer_params\.cfg\]/a [include Helper-Script/KAMP/KAMP_Settings.cfg]' "$PRINTER_CFG"
+        fi
+        if grep -q "\[gcode_macro START_PRINT\]" "$MACROS_CFG" ; then
+          echo -e "Info: Disabling [gcode_macro START_PRINT] in gcode_macro.cfg file..."
+          sed -i '/\[gcode_macro START_PRINT\]/,/^\s*CX_PRINT_DRAW_ONE_LINE/ { /^\s*$/d }' "$MACROS_CFG"
+          sed -i '/^\[gcode_macro START_PRINT\]/,/^\s*$/ s/^\(\s*\)\([^#]\)/#\1\2/' "$MACROS_CFG"
+        else
+          echo -e "Info: [gcode_macro START_PRINT] is already disabled in gcode_macro.cfg file..."
+        fi
+        echo
+        local yn_prusa
+        while true; do
+          read -p " Do you want to enable needed macros for PrusaSlicer? (${yellow}y${white}/${yellow}n${white}): ${yellow}" yn_prusa
+          case "${yn_prusa}" in
+            Y|y)
+              echo -e "${white}"
+              if grep -q "#\[include Prusa_Slicer.cfg\]" "$KAMP_FOLDER"/KAMP_Settings.cfg ; then
+                echo -e "Info: Enabling [include Prusa_Slicer.cfg] in KAMP_Settings.cfg file..."
+                sed -i 's/^#\[include Prusa_Slicer\.cfg\]/[include Prusa_Slicer.cfg]/' "$KAMP_FOLDER"/KAMP_Settings.cfg
+              else
+                echo -e "Info: [include Prusa_Slicer.cfg] is already enabled in KAMP_Settings.cfg file..."
+              fi
+              break;;
+            N|n)
+              echo -e "${white}"
+              break;;
+            *)
+              error_msg "Please select a correct choice!";;
+          esac
+        done
+        echo -e "Info: Restarting Klipper service..."
+        restart_klipper
+        ok_msg "Klipper Adaptive Meshing & Purging has been installed successfully!"
+        echo -e "   Make sure Label Objects setting is enabled in your slicer."
+        return;;
+      N|n)
+        error_msg "Installation canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}
+
+function remove_kamp(){
+  kamp_message
+  local yn
+  while true; do
+    remove_msg "Klipper Adaptive Meshing & Purging" yn
+    case "${yn}" in
+      Y|y)
+        echo -e "${white}"
+        echo -e "Info: Removing files..." 
+        rm -rf "$HS_CONFIG_FOLDER"/KAMP
+        if grep -q "include Helper-Script/KAMP/KAMP_Settings" "$PRINTER_CFG" ; then
+          echo -e "Info: Removing KAMP configurations in printer.cfg file..."
+          sed -i '/include Helper-Script\/KAMP\/KAMP_Settings\.cfg/d' "$PRINTER_CFG"
+        else
+          echo -e "Info: KAMP configurations are already removed in printer.cfg file..."
+        fi
+        if grep -q "#\[gcode_macro START_PRINT\]" "$MACROS_CFG" ; then
+          echo -e "Info: Enabling [gcode_macro START_PRINT] in gcode_macro.cfg file..."
+          sed -i -e 's/^\s*#[[:space:]]*\[gcode_macro START_PRINT\]/[gcode_macro START_PRINT]/' -e '/^\[gcode_macro START_PRINT\]/,/^\s*$/ s/^\(\s*\)#/\1/' "$MACROS_CFG"
+        else
+          echo -e "Info: [gcode_macro START_PRINT] is already enabled in gcode_macro.cfg file..."
+        fi
+        if [ ! -n "$(ls -A "$HS_CONFIG_FOLDER")" ]; then
+          rm -rf "$HS_CONFIG_FOLDER"
+        fi
+        echo -e "Info: Restarting Klipper service..."
+        restart_klipper
+        ok_msg "Klipper Adaptive Meshing & Purging has been removed successfully!"
+        return;;
+      N|n)
+        error_msg "Deletion canceled!"
+        return;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+}