From 70268f003f7d85d1b223c124d6b3dfce10ce4900 Mon Sep 17 00:00:00 2001
From: Cyril <guilouz6@hotmail.com>
Date: Wed, 29 May 2024 00:13:52 +0200
Subject: [PATCH] Update

---
 files/macros/save-zoffset.cfg                 |  20 +-
 .../screws-tilt-adjust-3ke.cfg                |  25 ++
 helper.sh                                     |   5 +-
 scripts/menu/10SE/customize_menu_10SE.sh      |  91 +++++++
 scripts/menu/10SE/info_menu_10SE.sh           |  95 ++++++++
 .../install_menu_10SE.sh}                     |  87 ++++---
 .../remove_menu_10SE.sh}                      |  87 ++++---
 scripts/menu/10SE/tools_menu_10SE.sh          | 110 +++++++++
 .../customize_menu_3KE.sh}                    |  18 +-
 scripts/menu/3KE/info_menu_3KE.sh             |  97 ++++++++
 scripts/menu/3KE/install_menu_3KE.sh          | 226 ++++++++++++++++++
 scripts/menu/3KE/remove_menu_3KE.sh           | 204 ++++++++++++++++
 .../tools_menu_3KE.sh}                        |  32 +--
 scripts/menu/KE/info_menu_KE.sh               |  95 --------
 scripts/menu/main_menu.sh                     |  20 +-
 scripts/paths.sh                              |   1 +
 scripts/screws_tilt_adjust.sh                 |  41 ++--
 17 files changed, 1007 insertions(+), 247 deletions(-)
 create mode 100644 files/screws-tilt-adjust/screws-tilt-adjust-3ke.cfg
 create mode 100755 scripts/menu/10SE/customize_menu_10SE.sh
 create mode 100755 scripts/menu/10SE/info_menu_10SE.sh
 rename scripts/menu/{KE/install_menu_KE.sh => 10SE/install_menu_10SE.sh} (79%)
 rename scripts/menu/{KE/remove_menu_KE.sh => 10SE/remove_menu_10SE.sh} (75%)
 create mode 100755 scripts/menu/10SE/tools_menu_10SE.sh
 rename scripts/menu/{KE/customize_menu_KE.sh => 3KE/customize_menu_3KE.sh} (92%)
 create mode 100755 scripts/menu/3KE/info_menu_3KE.sh
 create mode 100755 scripts/menu/3KE/install_menu_3KE.sh
 create mode 100755 scripts/menu/3KE/remove_menu_3KE.sh
 rename scripts/menu/{KE/tools_menu_KE.sh => 3KE/tools_menu_3KE.sh} (75%)
 delete mode 100755 scripts/menu/KE/info_menu_KE.sh

diff --git a/files/macros/save-zoffset.cfg b/files/macros/save-zoffset.cfg
index abd3002..ff39100 100644
--- a/files/macros/save-zoffset.cfg
+++ b/files/macros/save-zoffset.cfg
@@ -13,16 +13,20 @@ description: Saving Z-Offset
 rename_existing: _SET_GCODE_OFFSET
 gcode:
   {% if printer.save_variables.variables.zoffset %}
-  {% set zoffset = printer.save_variables.variables.zoffset %}
+    {% set zoffset = printer.save_variables.variables.zoffset %}
   {% else %}
-  {% set zoffset = {'z': None} %}
+    {% set zoffset = {'z': None} %}
   {% endif %}
   {% set ns = namespace(zoffset={'z': zoffset.z}) %}
   _SET_GCODE_OFFSET {% for p in params %}{'%s=%s '% (p, params[p])}{% endfor %}
-  {%if 'Z' in params %}{% set null = ns.zoffset.update({'z': params.Z}) %}{% endif %}
+  {%if 'Z' in params %}
+    {% set null = ns.zoffset.update({'z': params.Z}) %}
+  {% endif %}
   {%if 'Z_ADJUST' in params %}
-  {%if ns.zoffset.z == None %}{% set null = ns.zoffset.update({'z': 0}) %}{% endif %}
-  {% set null = ns.zoffset.update({'z': (ns.zoffset.z | float) + (params.Z_ADJUST | float)}) %}
+    {%if ns.zoffset.z == None %}
+      {% set null = ns.zoffset.update({'z': 0}) %}
+    {% endif %}
+    {% set null = ns.zoffset.update({'z': (ns.zoffset.z | float) + (params.Z_ADJUST | float)}) %}
   {% endif %}
   SAVE_VARIABLE VARIABLE=zoffset VALUE="{ns.zoffset}"
 
@@ -31,8 +35,8 @@ gcode:
 initial_duration: 2
 gcode:
   {% if printer.save_variables.variables.zoffset %}
-  {% set zoffset = printer.save_variables.variables.zoffset %}
-  _SET_GCODE_OFFSET {% for axis, offset in zoffset.items() if zoffset[axis] %}{ "%s=%s " % (axis, offset) }{% endfor %}
-  RESPOND TYPE=command MSG="Loaded Z-Offset from variables.cfg: {zoffset.z}mm"
+    {% set zoffset = printer.save_variables.variables.zoffset %}
+    _SET_GCODE_OFFSET {% for axis, offset in zoffset.items() if zoffset[axis] %}{ "%s=%s " % (axis, offset) }{% endfor %}
+    RESPOND TYPE=command MSG="Loaded Z-Offset from variables.cfg: {zoffset.z}mm"
   {% endif %}
   
\ No newline at end of file
diff --git a/files/screws-tilt-adjust/screws-tilt-adjust-3ke.cfg b/files/screws-tilt-adjust/screws-tilt-adjust-3ke.cfg
new file mode 100644
index 0000000..8ec1dd4
--- /dev/null
+++ b/files/screws-tilt-adjust/screws-tilt-adjust-3ke.cfg
@@ -0,0 +1,25 @@
+########################################
+# Screws Tilt Adjust for Ender-3 V3 KE
+########################################
+
+[screws_tilt_adjust]
+screw1: 27.5, -0.5
+screw1_name: front left screw
+screw2: 196.5, -0.5
+screw2_name: front right screw
+screw3: 196.5, 169.5
+screw3_name: rear right screw
+screw4: 27.5, 169.5
+screw4_name: rear left screw
+horizontal_move_z: 5
+speed: 150
+screw_thread: CCW-M4
+
+
+[gcode_macro SCREWS_CALIBRATION]
+description: Start Bed Screws Calibration
+gcode:
+  {% if printer.toolhead.homed_axes != "xyz" %}
+    G28
+  {% endif %}
+  SCREWS_TILT_CALCULATE
\ No newline at end of file
diff --git a/helper.sh b/helper.sh
index f255e2b..fac48fa 100755
--- a/helper.sh
+++ b/helper.sh
@@ -6,9 +6,10 @@ clear
 HELPER_SCRIPT_FOLDER="$( cd "$( dirname "${0}" )" && pwd )"
 for script in "${HELPER_SCRIPT_FOLDER}/scripts/"*.sh; do . "${script}"; done
 for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/"*.sh; do . "${script}"; done
-for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/3V3/"*.sh; do . "${script}"; done
 for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/K1/"*.sh; do . "${script}"; done
-for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/KE/"*.sh; do . "${script}"; done
+for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/3V3/"*.sh; do . "${script}"; done
+for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/3KE/"*.sh; do . "${script}"; done
+for script in "${HELPER_SCRIPT_FOLDER}/scripts/menu/10SE/"*.sh; do . "${script}"; done
 
 function update_helper_script() {
   echo -e "${white}"
diff --git a/scripts/menu/10SE/customize_menu_10SE.sh b/scripts/menu/10SE/customize_menu_10SE.sh
new file mode 100755
index 0000000..ca339a2
--- /dev/null
+++ b/scripts/menu/10SE/customize_menu_10SE.sh
@@ -0,0 +1,91 @@
+#!/bin/sh
+
+set -e
+
+function customize_menu_ui_10se() {
+  top_line
+  title '[ CUSTOMIZE MENU ]' "${yellow}"
+  inner_line
+  hr
+  menu_option '1' 'Remove' 'Creality Web Interface'
+  menu_option '2' 'Restore' 'Creality Web Interface'
+  hr
+  menu_option '3' 'Install' 'Guppy Screen'
+  menu_option '4' 'Remove' 'Guppy Screen'
+  hr
+  menu_option '5' 'Install' 'Creality Dynamic Logos for Fluidd'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function customize_menu_10se() {
+  clear
+  customize_menu_ui_10se
+  local customize_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" customize_menu_opt
+    case "${customize_menu_opt}" in
+      1)
+        if [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$CREALITY_WEB_FILE" ]; then
+          error_msg "Creality Web Interface is already removed!"
+          echo -e " ${darkred}Please restore Creality Web Interface first if you want to change the default Web Interface.${white}"
+          echo
+        else
+          run "remove_creality_web_interface" "customize_menu_ui_10se"
+        fi;;
+      2)
+        if [ -f "$CREALITY_WEB_FILE" ]; then
+          error_msg "Creality Web Interface is already present!"
+        elif [ ! -f "$INITD_FOLDER"/S99start_app ]; then
+          error_msg "Guppy Screen need to be removed first to restore Creality Web Interface!"
+        else
+          run "restore_creality_web_interface" "customize_menu_ui_10se"
+        fi;;
+      3)
+        if [ -d "$GUPPY_SCREEN_FOLDER" ]; then
+          error_msg "Guppy Screen is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ "$(curl -s localhost:7125/server/info | jq .result.klippy_connected)" != "true" ]; then
+          error_msg "Moonraker and Klipper do not seem to be functional. Please check this!"
+        elif [ ! -f /lib/ld-2.29.so ]; then
+          error_msg "Make sure you're running latest firmware version!"
+        elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is needed, please install it first!"
+        elif [ -d "$IMP_SHAPERS_FOLDER" ]; then
+          error_msg "Please remove Improved Shapers Calibrations first, Guppy Screen already use it!"
+        else
+          run "install_guppy_screen" "customize_menu_ui_10se"
+        fi;;
+      4)
+        if [ ! -d "$GUPPY_SCREEN_FOLDER" ]; then
+          error_msg "Guppy Screen is not installed!"
+        else
+          run "remove_guppy_screen" "customize_menu_ui_10se"
+        fi;;
+      5)
+        if [ -f "$FLUIDD_LOGO_FILE" ]; then
+          error_msg "Creality Dynamic Logos for Fluidd are already installed!"
+        elif [ ! -d "$FLUIDD_FOLDER" ]; then
+          error_msg "Fluidd is needed, please install it first!"
+        else
+          run "install_creality_dynamic_logos" "customize_menu_ui_10se"
+        fi;;
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+  customize_menu_10se
+}
diff --git a/scripts/menu/10SE/info_menu_10SE.sh b/scripts/menu/10SE/info_menu_10SE.sh
new file mode 100755
index 0000000..f9769cb
--- /dev/null
+++ b/scripts/menu/10SE/info_menu_10SE.sh
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+set -e
+
+function check_folder_10se() {
+  local folder_path="$1"
+  if [ -d "$folder_path" ]; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function check_file_10se() {
+  local file_path="$1"
+  if [ -f "$file_path" ]; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function check_simplyprint_10se() {
+  if [ ! -f "$MOONRAKER_CFG" ]; then
+    echo -e "${red}✗"
+  elif grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function info_menu_ui_10se() {
+  top_line
+  title '[ INFORMATION MENU ]' "${yellow}"
+  inner_line
+  hr
+  subtitle '•ESSENTIALS:'
+  info_line "$(check_folder_10se "$MOONRAKER_FOLDER")" 'Moonraker & Nginx'
+  info_line "$(check_folder_10se "$FLUIDD_FOLDER")" 'Fluidd'
+  info_line "$(check_folder_10se "$MAINSAIL_FOLDER")" 'Mainsail'
+  hr
+  subtitle '•UTILITIES:'
+  info_line "$(check_file_10se "$ENTWARE_FILE")" 'Entware'
+  info_line "$(check_file_10se "$KLIPPER_SHELL_FILE")" 'Klipper Gcode Shell Command'
+  hr
+  subtitle '•IMPROVEMENTS:'
+  info_line "$(check_folder_10se "$IMP_SHAPERS_FOLDER")" 'Improved Shapers Calibrations'
+  info_line "$(check_file_10se "$SAVE_ZOFFSET_FILE")" 'Save Z-Offset Macros'
+  info_line "$(check_file_10se "$GIT_BACKUP_FILE")" 'Git Backup'
+  hr
+  subtitle '•CAMERA:'
+  info_line "$(check_file_10se "$TIMELAPSE_FILE")" 'Moonraker Timelapse'
+  info_line "$(check_file_10se "$CAMERA_SETTINGS_FILE")" 'Nebula Camera Settings Control'
+  info_line "$(check_file_10se "$USB_CAMERA_FILE")" 'USB Camera Support'
+  hr
+  subtitle '•REMOTE ACCESS:'
+  info_line "$(check_folder_10se "$OCTOEVERYWHERE_FOLDER")" 'OctoEverywhere'
+  info_line "$(check_folder_10se "$MOONRAKER_OBICO_FOLDER")" 'Obico'
+  info_line "$(check_folder_10se "$GUPPYFLO_FOLDER")" 'GuppyFLO'
+  info_line "$(check_folder_10se "$MOBILERAKER_COMPANION_FOLDER")" 'Mobileraker Companion'
+  info_line "$(check_folder_10se "$OCTOAPP_COMPANION_FOLDER")" 'OctoApp Companion'
+  info_line "$(check_simplyprint_10se)" 'SimplyPrint'
+  hr
+  subtitle '•CUSTOMIZATION:'
+  info_line "$(check_file_10se "$CREALITY_WEB_FILE")" 'Creality Web Interface'
+  info_line "$(check_folder_10se "$GUPPY_SCREEN_FOLDER")" 'Guppy Screen'
+  info_line "$(check_file_10se "$FLUIDD_LOGO_FILE")" 'Creality Dynamic Logos for Fluidd'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function info_menu_10se() {
+  clear
+  info_menu_ui_10se
+  local info_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" info_menu_opt
+    case "${info_menu_opt}" in
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+  info_menu_10se
+}
diff --git a/scripts/menu/KE/install_menu_KE.sh b/scripts/menu/10SE/install_menu_10SE.sh
similarity index 79%
rename from scripts/menu/KE/install_menu_KE.sh
rename to scripts/menu/10SE/install_menu_10SE.sh
index 9e31353..7eca635 100755
--- a/scripts/menu/KE/install_menu_KE.sh
+++ b/scripts/menu/10SE/install_menu_10SE.sh
@@ -2,7 +2,7 @@
 
 set -e
 
-function install_menu_ui_ke() {
+function install_menu_ui_10se() {
   top_line
   title '[ INSTALL MENU ]' "${yellow}"
   inner_line
@@ -19,21 +19,20 @@ function install_menu_ui_ke() {
   subtitle '•IMPROVEMENTS:'
   menu_option ' 6' 'Install' 'Improved Shapers Calibrations'
   menu_option ' 7' 'Install' 'Save Z-Offset Macros'
-  menu_option ' 8' 'Install' 'M600 Support'
-  menu_option ' 9' 'Install' 'Git Backup'
+  menu_option ' 8' 'Install' 'Git Backup'
   hr
   subtitle '•CAMERA:'
-  menu_option '10' 'Install' 'Moonraker Timelapse'
-  menu_option '11' 'Install' 'Nebula Camera Settings Control'
-  menu_option '12' 'Install' 'USB Camera Support'
+  menu_option ' 9' 'Install' 'Moonraker Timelapse'
+  menu_option '10' 'Install' 'Nebula Camera Settings Control'
+  menu_option '11' 'Install' 'USB Camera Support'
   hr
   subtitle '•REMOTE ACCESS:'
-  menu_option '13' 'Install' 'OctoEverywhere'
-  menu_option '14' 'Install' 'Moonraker Obico'
-  menu_option '15' 'Install' 'GuppyFLO'
-  menu_option '16' 'Install' 'Mobileraker Companion'
-  menu_option '17' 'Install' 'OctoApp Companion'
-  menu_option '18' 'Install' 'SimplyPrint'
+  menu_option '12' 'Install' 'OctoEverywhere'
+  menu_option '13' 'Install' 'Moonraker Obico'
+  menu_option '14' 'Install' 'GuppyFLO'
+  menu_option '15' 'Install' 'Mobileraker Companion'
+  menu_option '16' 'Install' 'OctoApp Companion'
+  menu_option '17' 'Install' 'SimplyPrint'
   hr
   inner_line
   hr
@@ -44,9 +43,9 @@ function install_menu_ui_ke() {
   bottom_line
 }
 
-function install_menu_ke() {
+function install_menu_10se() {
   clear
-  install_menu_ui_ke
+  install_menu_ui_10se
   local install_menu_opt
   while true; do
     read -p " ${white}Type your choice and validate with Enter: ${yellow}" install_menu_opt
@@ -55,7 +54,7 @@ function install_menu_ke() {
         if [ -d "$MOONRAKER_FOLDER" ]; then  
           error_msg "Moonraker and Nginx are already installed!"
         else
-          run "install_moonraker_nginx" "install_menu_ui_ke"
+          run "install_moonraker_nginx" "install_menu_ui_10se"
         fi;;
       2)
         if [ -d "$FLUIDD_FOLDER" ]; then  
@@ -63,7 +62,7 @@ function install_menu_ke() {
         elif [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
           error_msg "Moonraker and Nginx are needed, please install them first!"
         else
-          run "install_fluidd" "install_menu_ui_ke"
+          run "install_fluidd" "install_menu_ui_10se"
         fi;;
       3)
         if [ -d "$MAINSAIL_FOLDER" ]; then  
@@ -71,19 +70,19 @@ function install_menu_ke() {
         elif [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
           error_msg "Moonraker and Nginx are needed, please install them first!"
         else
-          run "install_mainsail" "install_menu_ui_ke"
+          run "install_mainsail" "install_menu_ui_10se"
         fi;;
       4)
         if [ -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is already installed!"
         else
-          run "install_entware" "install_menu_ui_ke"
+          run "install_entware" "install_menu_ui_10se"
         fi;;
       5)
         if [ -f "$KLIPPER_SHELL_FILE" ]; then
           error_msg "Klipper Gcode Shell Command is already installed!"
         else
-          run "install_gcode_shell_command" "install_menu_ui_ke"
+          run "install_gcode_shell_command" "install_menu_ui_10se"
         fi;;
       6)
         if [ -d "$IMP_SHAPERS_FOLDER" ]; then
@@ -93,21 +92,15 @@ function install_menu_ke() {
         elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
           error_msg "Klipper Gcode Shell Command is needed, please install it first!"
         else
-          run "install_improved_shapers" "install_menu_ui_ke"
+          run "install_improved_shapers" "install_menu_ui_10se"
         fi;;
       7)
         if [ -f "$SAVE_ZOFFSET_FILE" ]; then
           error_msg "Save Z-Offset Macros are already installed!"
         else
-          run "install_save_zoffset_macros" "install_menu_ui_ke"
+          run "install_save_zoffset_macros" "install_menu_ui_10se"
         fi;;
       8)
-        if [ -f "$M600_SUPPORT_FILE" ]; then
-          error_msg "M600 Support is already installed!"
-        else
-          run "install_m600_support" "install_menu_ui_k1"
-        fi;;
-      9)
         if [ -f "$GIT_BACKUP_FILE" ]; then
           error_msg "Git Backup is already installed!"
         elif [ ! -f "$ENTWARE_FILE" ]; then
@@ -115,17 +108,17 @@ function install_menu_ke() {
         elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
           error_msg "Klipper Gcode Shell Command is needed, please install it first!"
         else
-          run "install_git_backup" "install_menu_ui_ke"
+          run "install_git_backup" "install_menu_ui_10se"
         fi;;
-      10)
+      9)
         if [ -f "$TIMELAPSE_FILE" ]; then
           error_msg "Moonraker Timelapse is already installed!"
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_moonraker_timelapse" "install_menu_ui_ke"
+          run "install_moonraker_timelapse" "install_menu_ui_10se"
         fi;;
-      11)
+      10)
         if [ -f "$CAMERA_SETTINGS_FILE" ]; then
           error_msg "Nebula Camera Settings Control is already installed!"
         elif ! v4l2-ctl --list-devices | grep -q 'CCX2F3298'; then
@@ -133,9 +126,9 @@ function install_menu_ke() {
         elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
           error_msg "Klipper Gcode Shell Command is needed, please install it first!"
         else
-          run "install_camera_settings_control" "install_menu_ui_ke"
+          run "install_camera_settings_control" "install_menu_ui_10se"
         fi;;
-      12)
+      11)
         if [ -f "$USB_CAMERA_FILE" ]; then
           error_msg "Camera USB Support is already installed!"
         elif v4l2-ctl --list-devices | grep -qE 'CREALITY|CCX2F3298'; then
@@ -143,9 +136,9 @@ function install_menu_ke() {
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_usb_camera" "install_menu_ui_ke"
+          run "install_usb_camera" "install_menu_ui_10se"
         fi;;
-      13)
+      12)
         if [ -d "$OCTOEVERYWHERE_FOLDER" ]; then
           error_msg "OctoEverywhere is already installed!"
         elif [ ! -d "$MOONRAKER_FOLDER" ]; then
@@ -155,9 +148,9 @@ function install_menu_ke() {
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_octoeverywhere" "install_menu_ui_ke"
+          run "install_octoeverywhere" "install_menu_ui_10se"
         fi;;
-      14)
+      13)
         if [ ! -d "$MOONRAKER_FOLDER" ]; then
           error_msg "Moonraker and Nginx are needed, please install them first!"
         elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
@@ -165,15 +158,15 @@ function install_menu_ke() {
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_moonraker_obico" "install_menu_ui_ke"
+          run "install_moonraker_obico" "install_menu_ui_10se"
         fi;;
-      15)
+      14)
         if [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
           error_msg "Moonraker and Nginx are needed, please install them first!"
         else
-          run "install_guppyflo" "install_menu_ui_ke"
+          run "install_guppyflo" "install_menu_ui_10se"
         fi;;
-      16)
+      15)
         if [ -d "$MOBILERAKER_COMPANION_FOLDER" ]; then
           error_msg "Mobileraker Companion is already installed!"
         elif [ ! -d "$MOONRAKER_FOLDER" ]; then
@@ -183,9 +176,9 @@ function install_menu_ke() {
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_mobileraker_companion" "install_menu_ui_ke"
+          run "install_mobileraker_companion" "install_menu_ui_10se"
         fi;;
-      17)
+      16)
         if [ -d "$OCTOAPP_COMPANION_FOLDER" ]; then
           error_msg "OctoApp Companion is already installed!"
         elif [ ! -d "$MOONRAKER_FOLDER" ]; then
@@ -195,9 +188,9 @@ function install_menu_ke() {
         elif [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is needed, please install it first!"
         else
-          run "install_octoapp_companion" "install_menu_ui_ke"
+          run "install_octoapp_companion" "install_menu_ui_10se"
         fi;;
-      18)
+      17)
         if grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
           error_msg "SimplyPrint is already installed!"
         elif [ ! -d "$MOONRAKER_FOLDER" ]; then
@@ -205,7 +198,7 @@ function install_menu_ke() {
         elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
           error_msg "Fluidd or Mainsail is needed, please install one of them first!"
         else
-          run "install_simplyprint" "install_menu_ui_ke"
+          run "install_simplyprint" "install_menu_ui_10se"
         fi;;
       B|b)
         clear; main_menu; break;;
@@ -215,5 +208,5 @@ function install_menu_ke() {
         error_msg "Please select a correct choice!";;
     esac
   done
-  install_menu_ke
+  install_menu_10se
 }
\ No newline at end of file
diff --git a/scripts/menu/KE/remove_menu_KE.sh b/scripts/menu/10SE/remove_menu_10SE.sh
similarity index 75%
rename from scripts/menu/KE/remove_menu_KE.sh
rename to scripts/menu/10SE/remove_menu_10SE.sh
index 0c48923..fdbb7a7 100755
--- a/scripts/menu/KE/remove_menu_KE.sh
+++ b/scripts/menu/10SE/remove_menu_10SE.sh
@@ -2,7 +2,7 @@
 
 set -e
 
-function remove_menu_ui_ke() {
+function remove_menu_ui_10se() {
   top_line
   title '[ REMOVE MENU ]' "${yellow}"
   inner_line
@@ -19,21 +19,20 @@ function remove_menu_ui_ke() {
   subtitle '•IMPROVEMENTS:'
   menu_option ' 6' 'Remove' 'Improved Shapers Calibrations'
   menu_option ' 7' 'Remove' 'Save Z-Offset Macros'
-  menu_option ' 8' 'Remove' 'M600 Support'
-  menu_option ' 9' 'Remove' 'Git Backup'
+  menu_option ' 8' 'Remove' 'Git Backup'
   hr
   subtitle '•CAMERA:'
-  menu_option '10' 'Remove' 'Moonraker Timelapse'
-  menu_option '11' 'Install' 'Nebula Camera Settings Control'
-  menu_option '12' 'Remove' 'USB Camera Support'
+  menu_option ' 9' 'Remove' 'Moonraker Timelapse'
+  menu_option '10' 'Remove' 'Nebula Camera Settings Control'
+  menu_option '11' 'Remove' 'USB Camera Support'
   hr
   subtitle '•REMOTE ACCESS:'
-  menu_option '13' 'Remove' 'OctoEverywhere'
-  menu_option '14' 'Remove' 'Moonraker Obico'
-  menu_option '15' 'Remove' 'GuppyFLO'
-  menu_option '16' 'Remove' 'Mobileraker Companion'
-  menu_option '17' 'Remove' 'OctoApp Companion'
-  menu_option '18' 'Remove' 'SimplyPrint'
+  menu_option '12' 'Remove' 'OctoEverywhere'
+  menu_option '13' 'Remove' 'Moonraker Obico'
+  menu_option '14' 'Remove' 'GuppyFLO'
+  menu_option '15' 'Remove' 'Mobileraker Companion'
+  menu_option '16' 'Remove' 'OctoApp Companion'
+  menu_option '17' 'Remove' 'SimplyPrint'
   hr
   inner_line
   hr
@@ -44,9 +43,9 @@ function remove_menu_ui_ke() {
   bottom_line
 }
 
-function remove_menu_ke() {
+function remove_menu_10se() {
   clear
-  remove_menu_ui_ke
+  remove_menu_ui_10se
   local remove_menu_opt
   while true; do
     read -p " ${white}Type your choice and validate with Enter: ${yellow}" remove_menu_opt
@@ -57,7 +56,7 @@ function remove_menu_ke() {
         elif [ -d "$GUPPY_SCREEN_FOLDER" ]; then
           error_msg "Moonraker is needed to use Guppy Screen, please uninstall it first!"
         else
-         run "remove_moonraker_nginx" "remove_menu_ui_ke"
+         run "remove_moonraker_nginx" "remove_menu_ui_10se"
         fi;;
       2)
         if [ ! -d "$FLUIDD_FOLDER" ]; then
@@ -67,7 +66,7 @@ function remove_menu_ke() {
           echo -e " ${darkred}Please restore Creality Web Interface first if you want to remove Fluidd.${white}"
           echo
         else
-          run "remove_fluidd" "remove_menu_ui_ke"
+          run "remove_fluidd" "remove_menu_ui_10se"
         fi;;
       3)
         if [ ! -d "$MAINSAIL_FOLDER" ]; then
@@ -77,7 +76,7 @@ function remove_menu_ke() {
           echo -e " ${darkred}Please restore Creality Web Interface first if you want to remove Mainsail.${white}"
           echo
         else
-          run "remove_mainsail" "remove_menu_ui_ke"
+          run "remove_mainsail" "remove_menu_ui_10se"
         fi;;
       4)
         if [ ! -f "$ENTWARE_FILE" ]; then
@@ -93,7 +92,7 @@ function remove_menu_ke() {
         elif [ -f "$USB_CAMERA_FILE" ]; then
           error_msg "Entware is needed to use USB Camera Support, please uninstall it first!"
         else
-          run "remove_entware" "remove_menu_ui_ke"
+          run "remove_entware" "remove_menu_ui_10se"
         fi;;
       5)
         if [ ! -f "$KLIPPER_SHELL_FILE" ]; then
@@ -105,85 +104,79 @@ function remove_menu_ke() {
         elif [ -f "$GIT_BACKUP_FILE" ]; then
           error_msg "Klipper Gcode Shell Command is needed to use Git Backup, please uninstall it first!"
         else
-          run "remove_gcode_shell_command" "remove_menu_ui_ke"
+          run "remove_gcode_shell_command" "remove_menu_ui_10se"
         fi;;
       6)
         if [ ! -d "$IMP_SHAPERS_FOLDER" ]; then
           error_msg "Improved Shapers Calibrations are not installed!"
         else
-          run "remove_improved_shapers" "remove_menu_ui_ke"
+          run "remove_improved_shapers" "remove_menu_ui_10se"
         fi;;
       7)
         if [ ! -f "$SAVE_ZOFFSET_FILE" ]; then
           error_msg "Save Z-Offset Macros are not installed!"
         else
-          run "remove_save_zoffset_macros" "remove_menu_ui_ke"
+          run "remove_save_zoffset_macros" "remove_menu_ui_10se"
         fi;;
       8)
-        if [ ! -f "$M600_SUPPORT_FILE" ]; then
-          error_msg "M600 Support is not installed!"
-        else
-          run "remove_m600_support" "remove_menu_ui_ke"
-        fi;;
-      9)
         if [ ! -f "$GIT_BACKUP_FILE" ]; then
           error_msg "Git Backup is not installed!"
         else
-          run "remove_git_backup" "remove_menu_ui_ke"
+          run "remove_git_backup" "remove_menu_ui_10se"
         fi;;
-      10)
+      9)
         if [ ! -f "$TIMELAPSE_FILE" ]; then
           error_msg "Moonraker Timelapse is not installed!"
         else
-          run "remove_moonraker_timelapse" "remove_menu_ui_ke"
+          run "remove_moonraker_timelapse" "remove_menu_ui_10se"
         fi;;
-      11)
+      10)
         if [ ! -f "$CAMERA_SETTINGS_FILE" ]; then
           error_msg "Nebula Camera Settings Control is not installed!"
         else
-          run "remove_camera_settings_control" "remove_menu_ui_ke"
+          run "remove_camera_settings_control" "remove_menu_ui_10se"
         fi;;
-      12)
+      11)
         if [ ! -f "$USB_CAMERA_FILE" ]; then
           error_msg "USB Camera Support is not installed!"
         else
-          run "remove_usb_camera" "remove_menu_ui_3v3"
+          run "remove_usb_camera" "remove_menu_ui_10se"
         fi;;
-      13)
+      12)
         if [ ! -d "$OCTOEVERYWHERE_FOLDER" ]; then
           error_msg "OctoEverywhere is not installed!"
         else
-          run "remove_octoeverywhere" "remove_menu_ui_ke"
+          run "remove_octoeverywhere" "remove_menu_ui_10se"
         fi;;
-      14)
+      13)
         if [ ! -d "$MOONRAKER_OBICO_FOLDER" ]; then
           error_msg "Moonraker Obico is not installed!"
         else
-          run "remove_moonraker_obico" "remove_menu_ui_ke"
+          run "remove_moonraker_obico" "remove_menu_ui_10se"
         fi;;
-      15)
+      14)
         if [ ! -d "$GUPPYFLO_FOLDER" ]; then
           error_msg "GuppyFLO is not installed!"
         else
-          run "remove_guppyflo" "remove_menu_ui_ke"
+          run "remove_guppyflo" "remove_menu_ui_10se"
         fi;;
-      16)
+      15)
         if [ ! -d "$MOBILERAKER_COMPANION_FOLDER" ]; then
           error_msg "Mobileraker Companion is not installed!"
         else
-          run "remove_mobileraker_companion" "remove_menu_ui_ke"
+          run "remove_mobileraker_companion" "remove_menu_ui_10se"
         fi;;
-      17)
+      16)
         if [ ! -d "$OCTOAPP_COMPANION_FOLDER" ]; then
           error_msg "OctoApp Companion is not installed!"
         else
-          run "remove_octoapp_companion" "remove_menu_ui_ke"
+          run "remove_octoapp_companion" "remove_menu_ui_10se"
         fi;;
-      18)
+      17)
         if ! grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
           error_msg "SimplyPrint is not installed!"
         else
-          run "remove_simplyprint" "remove_menu_ui_ke"
+          run "remove_simplyprint" "remove_menu_ui_10se"
         fi;;
       B|b)
         clear; main_menu; break;;
@@ -193,5 +186,5 @@ function remove_menu_ke() {
         error_msg "Please select a correct choice!";;
     esac
   done
-  remove_menu_ke
+  remove_menu_10se
 }
\ No newline at end of file
diff --git a/scripts/menu/10SE/tools_menu_10SE.sh b/scripts/menu/10SE/tools_menu_10SE.sh
new file mode 100755
index 0000000..79e7920
--- /dev/null
+++ b/scripts/menu/10SE/tools_menu_10SE.sh
@@ -0,0 +1,110 @@
+#!/bin/sh
+
+set -e
+
+function tools_menu_ui_10se() {
+  top_line
+  title '[ TOOLS MENU ]' "${yellow}"
+  inner_line
+  hr
+  menu_option ' 1' 'Prevent updating' 'Klipper configuration files'
+  menu_option ' 2' 'Allow updating' 'Klipper configuration files'
+  hr
+  menu_option ' 3' 'Enable' 'camera settings in Moonraker'
+  menu_option ' 4' 'Disable' 'camera settings in Moonraker'
+  hr
+  menu_option ' 5' 'Restart' 'Nginx service'
+  menu_option ' 6' 'Restart' 'Moonraker service'
+  menu_option ' 7' 'Restart' 'Klipper service'
+  hr
+  menu_option ' 8' 'Update' 'Entware packages'
+  hr
+  menu_option ' 9' 'Clear' 'cache'
+  menu_option '10' 'Clear' 'logs files'
+  hr
+  menu_option '11' 'Restore' 'a previous firmware'
+  hr
+  menu_option '12' 'Reset' 'factory settings'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function tools_menu_10se() {
+  clear
+  tools_menu_ui_10se
+  local tools_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" tools_menu_opt
+    case "${tools_menu_opt}" in
+      1)
+        if [ -f "$INITD_FOLDER"/disabled.S55klipper_service ]; then
+          error_msg "Updating Klipper configuration files is already prevented!"
+        else
+          run "prevent_updating_klipper_files" "tools_menu_ui_10se"
+        fi;;
+      2)
+        if [ ! -f "$INITD_FOLDER"/disabled.S55klipper_service ]; then
+          error_msg "Updating Klipper configuration files is already allowed!"
+        else
+          run "allow_updating_klipper_files" "tools_menu_ui_10se"
+        fi;;
+      3)
+        if grep -q "^\[webcam Camera\]$" "$MOONRAKER_CFG"; then
+          error_msg "Camera settings are alredy enabled in Moonraker!"
+        else
+          run "enable_camera_settings" "tools_menu_ui_10se"
+        fi;;
+      4)
+        if grep -q "^#\[webcam Camera\]" "$MOONRAKER_CFG"; then
+          error_msg "Camera settings are alredy disabled in Moonraker!"
+        else
+          run "disable_camera_settings" "tools_menu_ui_10se"
+        fi;;
+      5)
+        if [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Nginx is not installed!"
+        else
+          run "restart_nginx_action" "tools_menu_ui_10se"
+        fi;;
+      6)
+        if [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker is not installed!"
+        else
+          run "restart_moonraker_action" "tools_menu_ui_10se"
+        fi;;
+      7)
+        if [ ! -f "$INITD_FOLDER"/S55klipper_service ]; then
+          error_msg "Klipper service is not present!"
+        else
+          run "restart_klipper_action" "tools_menu_ui_10se"
+        fi;;
+      8)
+        if [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is not installed!"
+        else
+          run "update_entware_packages" "tools_menu_ui_10se"
+        fi;;
+      9)
+        run "clear_cache" "tools_menu_ui_10see";;
+      10)
+        run "clear_logs" "tools_menu_ui_10se";;
+      11)
+        run "restore_previous_firmware" "tools_menu_ui_10se";;
+      12)
+        run "reset_factory_settings" "tools_menu_ui_10se";;
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+         error_msg "Please select a correct choice!";;
+    esac
+  done
+  tools_menu_10se
+}
diff --git a/scripts/menu/KE/customize_menu_KE.sh b/scripts/menu/3KE/customize_menu_3KE.sh
similarity index 92%
rename from scripts/menu/KE/customize_menu_KE.sh
rename to scripts/menu/3KE/customize_menu_3KE.sh
index c7a6170..5f29bff 100755
--- a/scripts/menu/KE/customize_menu_KE.sh
+++ b/scripts/menu/3KE/customize_menu_3KE.sh
@@ -2,7 +2,7 @@
 
 set -e
 
-function customize_menu_ui_ke() {
+function customize_menu_ui_3ke() {
   top_line
   title '[ CUSTOMIZE MENU ]' "${yellow}"
   inner_line
@@ -24,9 +24,9 @@ function customize_menu_ui_ke() {
   bottom_line
 }
 
-function customize_menu_ke() {
+function customize_menu_3ke() {
   clear
-  customize_menu_ui_ke
+  customize_menu_ui_3ke
   local customize_menu_opt
   while true; do
     read -p " ${white}Type your choice and validate with Enter: ${yellow}" customize_menu_opt
@@ -39,7 +39,7 @@ function customize_menu_ke() {
           echo -e " ${darkred}Please restore Creality Web Interface first if you want to change the default Web Interface.${white}"
           echo
         else
-          run "remove_creality_web_interface" "customize_menu_ui_ke"
+          run "remove_creality_web_interface" "customize_menu_ui_3ke"
         fi;;
       2)
         if [ -f "$CREALITY_WEB_FILE" ]; then
@@ -47,7 +47,7 @@ function customize_menu_ke() {
         elif [ ! -f "$INITD_FOLDER"/S99start_app ]; then
           error_msg "Guppy Screen need to be removed first to restore Creality Web Interface!"
         else
-          run "restore_creality_web_interface" "customize_menu_ui_ke"
+          run "restore_creality_web_interface" "customize_menu_ui_3ke"
         fi;;
       3)
         if [ -d "$GUPPY_SCREEN_FOLDER" ]; then
@@ -63,13 +63,13 @@ function customize_menu_ke() {
         elif [ -d "$IMP_SHAPERS_FOLDER" ]; then
           error_msg "Please remove Improved Shapers Calibrations first, Guppy Screen already use it!"
         else
-          run "install_guppy_screen" "customize_menu_ui_ke"
+          run "install_guppy_screen" "customize_menu_ui_3ke"
         fi;;
       4)
         if [ ! -d "$GUPPY_SCREEN_FOLDER" ]; then
           error_msg "Guppy Screen is not installed!"
         else
-          run "remove_guppy_screen" "customize_menu_ui_ke"
+          run "remove_guppy_screen" "customize_menu_ui_3ke"
         fi;;
       5)
         if [ -f "$FLUIDD_LOGO_FILE" ]; then
@@ -77,7 +77,7 @@ function customize_menu_ke() {
         elif [ ! -d "$FLUIDD_FOLDER" ]; then
           error_msg "Fluidd is needed, please install it first!"
         else
-          run "install_creality_dynamic_logos" "customize_menu_ui_ke"
+          run "install_creality_dynamic_logos" "customize_menu_ui_3ke"
         fi;;
       B|b)
         clear; main_menu; break;;
@@ -87,5 +87,5 @@ function customize_menu_ke() {
         error_msg "Please select a correct choice!";;
     esac
   done
-  customize_menu_ke
+  customize_menu_3ke
 }
diff --git a/scripts/menu/3KE/info_menu_3KE.sh b/scripts/menu/3KE/info_menu_3KE.sh
new file mode 100755
index 0000000..75673ac
--- /dev/null
+++ b/scripts/menu/3KE/info_menu_3KE.sh
@@ -0,0 +1,97 @@
+#!/bin/sh
+
+set -e
+
+function check_folder_3ke() {
+  local folder_path="$1"
+  if [ -d "$folder_path" ]; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function check_file_3ke() {
+  local file_path="$1"
+  if [ -f "$file_path" ]; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function check_simplyprint_3ke() {
+  if [ ! -f "$MOONRAKER_CFG" ]; then
+    echo -e "${red}✗"
+  elif grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
+    echo -e "${green}✓"
+  else
+    echo -e "${red}✗"
+  fi
+}
+
+function info_menu_ui_3ke() {
+  top_line
+  title '[ INFORMATION MENU ]' "${yellow}"
+  inner_line
+  hr
+  subtitle '•ESSENTIALS:'
+  info_line "$(check_folder_3ke "$MOONRAKER_FOLDER")" 'Moonraker & Nginx'
+  info_line "$(check_folder_3ke "$FLUIDD_FOLDER")" 'Fluidd'
+  info_line "$(check_folder_3ke "$MAINSAIL_FOLDER")" 'Mainsail'
+  hr
+  subtitle '•UTILITIES:'
+  info_line "$(check_file_3ke "$ENTWARE_FILE")" 'Entware'
+  info_line "$(check_file_3ke "$KLIPPER_SHELL_FILE")" 'Klipper Gcode Shell Command'
+  hr
+  subtitle '•IMPROVEMENTS:'
+  info_line "$(check_folder_3ke "$IMP_SHAPERS_FOLDER")" 'Improved Shapers Calibrations'
+  info_line "$(check_file_3ke "$SAVE_ZOFFSET_FILE")" 'Save Z-Offset Macros'
+  info_line "$(check_file_3ke "$SCREWS_ADJUST_FILE")" 'Screws Tilt Adjust Support'
+  info_line "$(check_file_3ke "$M600_SUPPORT_FILE")" 'M600 Support'
+  info_line "$(check_file_3ke "$GIT_BACKUP_FILE")" 'Git Backup'
+  hr
+  subtitle '•CAMERA:'
+  info_line "$(check_file_3ke "$TIMELAPSE_FILE")" 'Moonraker Timelapse'
+  info_line "$(check_file_3ke "$CAMERA_SETTINGS_FILE")" 'Nebula Camera Settings Control'
+  info_line "$(check_file_3ke "$USB_CAMERA_FILE")" 'USB Camera Support'
+  hr
+  subtitle '•REMOTE ACCESS:'
+  info_line "$(check_folder_3ke "$OCTOEVERYWHERE_FOLDER")" 'OctoEverywhere'
+  info_line "$(check_folder_3ke "$MOONRAKER_OBICO_FOLDER")" 'Obico'
+  info_line "$(check_folder_3ke "$GUPPYFLO_FOLDER")" 'GuppyFLO'
+  info_line "$(check_folder_3ke "$MOBILERAKER_COMPANION_FOLDER")" 'Mobileraker Companion'
+  info_line "$(check_folder_3ke "$OCTOAPP_COMPANION_FOLDER")" 'OctoApp Companion'
+  info_line "$(check_simplyprint_3ke)" 'SimplyPrint'
+  hr
+  subtitle '•CUSTOMIZATION:'
+  info_line "$(check_file_3ke "$CREALITY_WEB_FILE")" 'Creality Web Interface'
+  info_line "$(check_folder_3ke "$GUPPY_SCREEN_FOLDER")" 'Guppy Screen'
+  info_line "$(check_file_3ke "$FLUIDD_LOGO_FILE")" 'Creality Dynamic Logos for Fluidd'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function info_menu_3ke() {
+  clear
+  info_menu_ui_3ke
+  local info_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" info_menu_opt
+    case "${info_menu_opt}" in
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+  info_menu_3ke
+}
diff --git a/scripts/menu/3KE/install_menu_3KE.sh b/scripts/menu/3KE/install_menu_3KE.sh
new file mode 100755
index 0000000..c9a6f1e
--- /dev/null
+++ b/scripts/menu/3KE/install_menu_3KE.sh
@@ -0,0 +1,226 @@
+#!/bin/sh
+
+set -e
+
+function install_menu_ui_3ke() {
+  top_line
+  title '[ INSTALL MENU ]' "${yellow}"
+  inner_line
+  hr
+  subtitle '•ESSENTIALS:'
+  menu_option ' 1' 'Install' 'Moonraker and Nginx'
+  menu_option ' 2' 'Install' 'Fluidd (port 4408)'
+  menu_option ' 3' 'Install' 'Mainsail (port 4409)'
+  hr
+  subtitle '•UTILITIES:'
+  menu_option ' 4' 'Install' 'Entware'
+  menu_option ' 5' 'Install' 'Klipper Gcode Shell Command'
+  hr
+  subtitle '•IMPROVEMENTS:'
+  menu_option ' 6' 'Install' 'Improved Shapers Calibrations'
+  menu_option ' 7' 'Install' 'Save Z-Offset Macros'
+  menu_option ' 8' 'Install' 'M600 Support'
+  menu_option ' 9' 'Install' 'Screws Tilt Adjust Support'
+  menu_option '10' 'Install' 'Git Backup'
+  hr
+  subtitle '•CAMERA:'
+  menu_option '11' 'Install' 'Moonraker Timelapse'
+  menu_option '12' 'Install' 'Nebula Camera Settings Control'
+  menu_option '13' 'Install' 'USB Camera Support'
+  hr
+  subtitle '•REMOTE ACCESS:'
+  menu_option '14' 'Install' 'OctoEverywhere'
+  menu_option '15' 'Install' 'Moonraker Obico'
+  menu_option '16' 'Install' 'GuppyFLO'
+  menu_option '17' 'Install' 'Mobileraker Companion'
+  menu_option '18' 'Install' 'OctoApp Companion'
+  menu_option '19' 'Install' 'SimplyPrint'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function install_menu_3ke() {
+  clear
+  install_menu_ui_3ke
+  local install_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" install_menu_opt
+    case "${install_menu_opt}" in
+      1)
+        if [ -d "$MOONRAKER_FOLDER" ]; then  
+          error_msg "Moonraker and Nginx are already installed!"
+        else
+          run "install_moonraker_nginx" "install_menu_ui_3ke"
+        fi;;
+      2)
+        if [ -d "$FLUIDD_FOLDER" ]; then  
+          error_msg "Fluidd is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        else
+          run "install_fluidd" "install_menu_ui_3ke"
+        fi;;
+      3)
+        if [ -d "$MAINSAIL_FOLDER" ]; then  
+          error_msg "Mainsail is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        else
+          run "install_mainsail" "install_menu_ui_3ke"
+        fi;;
+      4)
+        if [ -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is already installed!"
+        else
+          run "install_entware" "install_menu_ui_3ke"
+        fi;;
+      5)
+        if [ -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is already installed!"
+        else
+          run "install_gcode_shell_command" "install_menu_ui_3ke"
+        fi;;
+      6)
+        if [ -d "$IMP_SHAPERS_FOLDER" ]; then
+          error_msg "Improved Shapers Calibrations are already installed!"
+        elif [ -d "$GUPPY_SCREEN_FOLDER" ]; then
+          error_msg "Guppy Screen already has these features!"
+        elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is needed, please install it first!"
+        else
+          run "install_improved_shapers" "install_menu_ui_3ke"
+        fi;;
+      7)
+        if [ -f "$SAVE_ZOFFSET_FILE" ]; then
+          error_msg "Save Z-Offset Macros are already installed!"
+        else
+          run "install_save_zoffset_macros" "install_menu_ui_3ke"
+        fi;;
+      8)
+        if [ -f "$M600_SUPPORT_FILE" ]; then
+          error_msg "M600 Support is already installed!"
+        else
+          run "install_m600_support" "install_menu_ui_3ke"
+        fi;;
+      9)
+        if [ -f "$SCREWS_ADJUST_FILE" ]; then
+          error_msg "Screws Tilt Adjust Support is already installed!"
+        else
+          run "install_screws_tilt_adjust" "install_menu_ui_3ke"
+        fi;;
+      10)
+        if [ -f "$GIT_BACKUP_FILE" ]; then
+          error_msg "Git Backup is already installed!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is needed, please install it first!"
+        else
+          run "install_git_backup" "install_menu_ui_3ke"
+        fi;;
+      11)
+        if [ -f "$TIMELAPSE_FILE" ]; then
+          error_msg "Moonraker Timelapse is already installed!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_moonraker_timelapse" "install_menu_ui_3ke"
+        fi;;
+      12)
+        if [ -f "$CAMERA_SETTINGS_FILE" ]; then
+          error_msg "Nebula Camera Settings Control is already installed!"
+        elif ! v4l2-ctl --list-devices | grep -q 'CCX2F3298'; then
+          error_msg "Nebula camera not detected, please plug it in!"
+        elif [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is needed, please install it first!"
+        else
+          run "install_camera_settings_control" "install_menu_ui_3ke"
+        fi;;
+      13)
+        if [ -f "$USB_CAMERA_FILE" ]; then
+          error_msg "Camera USB Support is already installed!"
+        elif v4l2-ctl --list-devices | grep -qE 'CREALITY|CCX2F3298'; then
+          error_msg "It looks like you are using a Creality camera and it's not compatible!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_usb_camera" "install_menu_ui_3ke"
+        fi;;
+      14)
+        if [ -d "$OCTOEVERYWHERE_FOLDER" ]; then
+          error_msg "OctoEverywhere is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_octoeverywhere" "install_menu_ui_3ke"
+        fi;;
+      15)
+        if [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_moonraker_obico" "install_menu_ui_3ke"
+        fi;;
+      16)
+        if [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        else
+          run "install_guppyflo" "install_menu_ui_3ke"
+        fi;;
+      17)
+        if [ -d "$MOBILERAKER_COMPANION_FOLDER" ]; then
+          error_msg "Mobileraker Companion is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_mobileraker_companion" "install_menu_ui_3ke"
+        fi;;
+      18)
+        if [ -d "$OCTOAPP_COMPANION_FOLDER" ]; then
+          error_msg "OctoApp Companion is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        elif [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is needed, please install it first!"
+        else
+          run "install_octoapp_companion" "install_menu_ui_3ke"
+        fi;;
+      19)
+        if grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
+          error_msg "SimplyPrint is already installed!"
+        elif [ ! -d "$MOONRAKER_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are needed, please install them first!"
+        elif [ ! -d "$FLUIDD_FOLDER" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Fluidd or Mainsail is needed, please install one of them first!"
+        else
+          run "install_simplyprint" "install_menu_ui_3ke"
+        fi;;
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+  install_menu_3ke
+}
\ No newline at end of file
diff --git a/scripts/menu/3KE/remove_menu_3KE.sh b/scripts/menu/3KE/remove_menu_3KE.sh
new file mode 100755
index 0000000..e21cc87
--- /dev/null
+++ b/scripts/menu/3KE/remove_menu_3KE.sh
@@ -0,0 +1,204 @@
+#!/bin/sh
+
+set -e
+
+function remove_menu_ui_3ke() {
+  top_line
+  title '[ REMOVE MENU ]' "${yellow}"
+  inner_line
+  hr
+  subtitle '•ESSENTIALS:'
+  menu_option ' 1' 'Remove' 'Moonraker and Nginx'
+  menu_option ' 2' 'Remove' 'Fluidd (port 4408)'
+  menu_option ' 3' 'Remove' 'Mainsail (port 4409)'
+  hr
+  subtitle '•UTILITIES:'
+  menu_option ' 4' 'Remove' 'Entware'
+  menu_option ' 5' 'Remove' 'Klipper Gcode Shell Command'
+  hr
+  subtitle '•IMPROVEMENTS:'
+  menu_option ' 6' 'Remove' 'Improved Shapers Calibrations'
+  menu_option ' 7' 'Remove' 'Save Z-Offset Macros'
+  menu_option ' 8' 'Remove' 'M600 Support'
+  menu_option ' 9' 'Remove' 'Screws Tilt Adjust Support'
+  menu_option '10' 'Remove' 'Git Backup'
+  hr
+  subtitle '•CAMERA:'
+  menu_option '11' 'Remove' 'Moonraker Timelapse'
+  menu_option '12' 'Remove' 'Nebula Camera Settings Control'
+  menu_option '13' 'Remove' 'USB Camera Support'
+  hr
+  subtitle '•REMOTE ACCESS:'
+  menu_option '14' 'Remove' 'OctoEverywhere'
+  menu_option '15' 'Remove' 'Moonraker Obico'
+  menu_option '16' 'Remove' 'GuppyFLO'
+  menu_option '17' 'Remove' 'Mobileraker Companion'
+  menu_option '18' 'Remove' 'OctoApp Companion'
+  menu_option '19' 'Remove' 'SimplyPrint'
+  hr
+  inner_line
+  hr
+  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
+  bottom_menu_option 'q' 'Exit' "${darkred}"
+  hr
+  version_line "$(get_script_version)"
+  bottom_line
+}
+
+function remove_menu_3ke() {
+  clear
+  remove_menu_ui_3ke
+  local remove_menu_opt
+  while true; do
+    read -p " ${white}Type your choice and validate with Enter: ${yellow}" remove_menu_opt
+    case "${remove_menu_opt}" in
+      1)
+        if [ ! -d "$MOONRAKER_FOLDER" ] && [ ! -d "$NGINX_FOLDER" ]; then
+          error_msg "Moonraker and Nginx are not installed!"
+        elif [ -d "$GUPPY_SCREEN_FOLDER" ]; then
+          error_msg "Moonraker is needed to use Guppy Screen, please uninstall it first!"
+        else
+         run "remove_moonraker_nginx" "remove_menu_ui_3ke"
+        fi;;
+      2)
+        if [ ! -d "$FLUIDD_FOLDER" ]; then
+          error_msg "Fluidd is not installed!"
+        elif [ ! -f "$CREALITY_WEB_FILE" ] && [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Creality Web Interface is removed!"
+          echo -e " ${darkred}Please restore Creality Web Interface first if you want to remove Fluidd.${white}"
+          echo
+        else
+          run "remove_fluidd" "remove_menu_ui_3ke"
+        fi;;
+      3)
+        if [ ! -d "$MAINSAIL_FOLDER" ]; then
+          error_msg "Mainsail is not installed!"
+        elif [ ! -f "$CREALITY_WEB_FILE" ] && [ ! -d "$FLUIDD_FOLDER" ]; then
+          error_msg "Creality Web Interface is removed!"
+          echo -e " ${darkred}Please restore Creality Web Interface first if you want to remove Mainsail.${white}"
+          echo
+        else
+          run "remove_mainsail" "remove_menu_ui_3ke"
+        fi;;
+      4)
+        if [ ! -f "$ENTWARE_FILE" ]; then
+          error_msg "Entware is not installed!"
+        elif [ -f "$TIMELAPSE_FILE" ]; then
+          error_msg "Entware is needed to use Moonraker Timelapse, please uninstall it first!"
+        elif [ -f "$GIT_BACKUP_FILE" ]; then
+          error_msg "Entware is needed to use Git Backup, please uninstall it first!"
+        elif [ -d "$OCTOEVERYWHERE_FOLDER" ]; then
+          error_msg "Entware is needed to use OctoEverywhere, please uninstall it first!"
+        elif [ -d "$MOONRAKER_OBICO_FOLDER" ]; then
+          error_msg "Entware is needed to use Moonraker Obico, please uninstall it first!"
+        elif [ -f "$USB_CAMERA_FILE" ]; then
+          error_msg "Entware is needed to use USB Camera Support, please uninstall it first!"
+        else
+          run "remove_entware" "remove_menu_ui_3ke"
+        fi;;
+      5)
+        if [ ! -f "$KLIPPER_SHELL_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is not installed!"
+        elif [ -d "$GUPPY_SCREEN_FOLDER" ]; then
+          error_msg "Klipper Gcode Shell Command is needed to use Guppy Screen, please uninstall it first!"
+        elif [ -d "$IMP_SHAPERS_FOLDER" ]; then
+          error_msg "Klipper Gcode Shell Command is needed to use Improved Shapers Calibrations, please uninstall it first!"
+        elif [ -f "$GIT_BACKUP_FILE" ]; then
+          error_msg "Klipper Gcode Shell Command is needed to use Git Backup, please uninstall it first!"
+        else
+          run "remove_gcode_shell_command" "remove_menu_ui_3ke"
+        fi;;
+      6)
+        if [ ! -d "$IMP_SHAPERS_FOLDER" ]; then
+          error_msg "Improved Shapers Calibrations are not installed!"
+        else
+          run "remove_improved_shapers" "remove_menu_ui_3ke"
+        fi;;
+      7)
+        if [ ! -f "$SAVE_ZOFFSET_FILE" ]; then
+          error_msg "Save Z-Offset Macros are not installed!"
+        else
+          run "remove_save_zoffset_macros" "remove_menu_ui_3ke"
+        fi;;
+      8)
+        if [ ! -f "$M600_SUPPORT_FILE" ]; then
+          error_msg "M600 Support is not installed!"
+        else
+          run "remove_m600_support" "remove_menu_ui_3ke"
+        fi;;
+      9)
+        if [ ! -f "$SCREWS_ADJUST_FILE" ]; then
+          error_msg "Screws Tilt Adjust Support is not installed!"
+        else
+          run "remove_screws_tilt_adjust" "remove_menu_ui_3ke"
+        fi;;
+      10)
+        if [ ! -f "$GIT_BACKUP_FILE" ]; then
+          error_msg "Git Backup is not installed!"
+        else
+          run "remove_git_backup" "remove_menu_ui_3ke"
+        fi;;
+      11)
+        if [ ! -f "$TIMELAPSE_FILE" ]; then
+          error_msg "Moonraker Timelapse is not installed!"
+        else
+          run "remove_moonraker_timelapse" "remove_menu_ui_3ke"
+        fi;;
+      12)
+        if [ ! -f "$CAMERA_SETTINGS_FILE" ]; then
+          error_msg "Nebula Camera Settings Control is not installed!"
+        else
+          run "remove_camera_settings_control" "remove_menu_ui_3ke"
+        fi;;
+      13)
+        if [ ! -f "$USB_CAMERA_FILE" ]; then
+          error_msg "USB Camera Support is not installed!"
+        else
+          run "remove_usb_camera" "remove_menu_ui_3ke"
+        fi;;
+      14)
+        if [ ! -d "$OCTOEVERYWHERE_FOLDER" ]; then
+          error_msg "OctoEverywhere is not installed!"
+        else
+          run "remove_octoeverywhere" "remove_menu_ui_3ke"
+        fi;;
+      15)
+        if [ ! -d "$MOONRAKER_OBICO_FOLDER" ]; then
+          error_msg "Moonraker Obico is not installed!"
+        else
+          run "remove_moonraker_obico" "remove_menu_ui_3ke"
+        fi;;
+      16)
+        if [ ! -d "$GUPPYFLO_FOLDER" ]; then
+          error_msg "GuppyFLO is not installed!"
+        else
+          run "remove_guppyflo" "remove_menu_ui_3ke"
+        fi;;
+      17)
+        if [ ! -d "$MOBILERAKER_COMPANION_FOLDER" ]; then
+          error_msg "Mobileraker Companion is not installed!"
+        else
+          run "remove_mobileraker_companion" "remove_menu_ui_3ke"
+        fi;;
+      18)
+        if [ ! -d "$OCTOAPP_COMPANION_FOLDER" ]; then
+          error_msg "OctoApp Companion is not installed!"
+        else
+          run "remove_octoapp_companion" "remove_menu_ui_3ke"
+        fi;;
+      19)
+        if ! grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
+          error_msg "SimplyPrint is not installed!"
+        else
+          run "remove_simplyprint" "remove_menu_ui_3ke"
+        fi;;
+      B|b)
+        clear; main_menu; break;;
+      Q|q)
+         clear; exit 0;;
+      *)
+        error_msg "Please select a correct choice!";;
+    esac
+  done
+  remove_menu_3ke
+}
\ No newline at end of file
diff --git a/scripts/menu/KE/tools_menu_KE.sh b/scripts/menu/3KE/tools_menu_3KE.sh
similarity index 75%
rename from scripts/menu/KE/tools_menu_KE.sh
rename to scripts/menu/3KE/tools_menu_3KE.sh
index b6e3987..e97622e 100755
--- a/scripts/menu/KE/tools_menu_KE.sh
+++ b/scripts/menu/3KE/tools_menu_3KE.sh
@@ -2,7 +2,7 @@
 
 set -e
 
-function tools_menu_ui_ke() {
+function tools_menu_ui_3ke() {
   top_line
   title '[ TOOLS MENU ]' "${yellow}"
   inner_line
@@ -35,9 +35,9 @@ function tools_menu_ui_ke() {
   bottom_line
 }
 
-function tools_menu_ke() {
+function tools_menu_3ke() {
   clear
-  tools_menu_ui_ke
+  tools_menu_ui_3ke
   local tools_menu_opt
   while true; do
     read -p " ${white}Type your choice and validate with Enter: ${yellow}" tools_menu_opt
@@ -46,58 +46,58 @@ function tools_menu_ke() {
         if [ -f "$INITD_FOLDER"/disabled.S55klipper_service ]; then
           error_msg "Updating Klipper configuration files is already prevented!"
         else
-          run "prevent_updating_klipper_files" "tools_menu_ui_ke"
+          run "prevent_updating_klipper_files" "tools_menu_ui_3ke"
         fi;;
       2)
         if [ ! -f "$INITD_FOLDER"/disabled.S55klipper_service ]; then
           error_msg "Updating Klipper configuration files is already allowed!"
         else
-          run "allow_updating_klipper_files" "tools_menu_ui_ke"
+          run "allow_updating_klipper_files" "tools_menu_ui_3ke"
         fi;;
       3)
         if grep -q "^\[webcam Camera\]$" "$MOONRAKER_CFG"; then
           error_msg "Camera settings are alredy enabled in Moonraker!"
         else
-          run "enable_camera_settings" "tools_menu_ui_ke"
+          run "enable_camera_settings" "tools_menu_ui_3ke"
         fi;;
       4)
         if grep -q "^#\[webcam Camera\]" "$MOONRAKER_CFG"; then
           error_msg "Camera settings are alredy disabled in Moonraker!"
         else
-          run "disable_camera_settings" "tools_menu_ui_ke"
+          run "disable_camera_settings" "tools_menu_ui_3ke"
         fi;;
       5)
         if [ ! -d "$NGINX_FOLDER" ]; then
           error_msg "Nginx is not installed!"
         else
-          run "restart_nginx_action" "tools_menu_ui_ke"
+          run "restart_nginx_action" "tools_menu_ui_3ke"
         fi;;
       6)
         if [ ! -d "$MOONRAKER_FOLDER" ]; then
           error_msg "Moonraker is not installed!"
         else
-          run "restart_moonraker_action" "tools_menu_ui_ke"
+          run "restart_moonraker_action" "tools_menu_ui_3ke"
         fi;;
       7)
         if [ ! -f "$INITD_FOLDER"/S55klipper_service ]; then
           error_msg "Klipper service is not present!"
         else
-          run "restart_klipper_action" "tools_menu_ui_ke"
+          run "restart_klipper_action" "tools_menu_ui_3ke"
         fi;;
       8)
         if [ ! -f "$ENTWARE_FILE" ]; then
           error_msg "Entware is not installed!"
         else
-          run "update_entware_packages" "tools_menu_ui_ke"
+          run "update_entware_packages" "tools_menu_ui_3ke"
         fi;;
       9)
-        run "clear_cache" "tools_menu_ui_ke";;
+        run "clear_cache" "tools_menu_ui_3ke";;
       10)
-        run "clear_logs" "tools_menu_ui_ke";;
+        run "clear_logs" "tools_menu_ui_3ke";;
       11)
-        run "restore_previous_firmware" "tools_menu_ui_ke";;
+        run "restore_previous_firmware" "tools_menu_ui_3ke";;
       12)
-        run "reset_factory_settings" "tools_menu_ui_ke";;
+        run "reset_factory_settings" "tools_menu_ui_3ke";;
       B|b)
         clear; main_menu; break;;
       Q|q)
@@ -106,5 +106,5 @@ function tools_menu_ke() {
          error_msg "Please select a correct choice!";;
     esac
   done
-  tools_menu_ke
+  tools_menu_3ke
 }
diff --git a/scripts/menu/KE/info_menu_KE.sh b/scripts/menu/KE/info_menu_KE.sh
deleted file mode 100755
index 019c737..0000000
--- a/scripts/menu/KE/info_menu_KE.sh
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/bin/sh
-
-set -e
-
-function check_folder_ke() {
-  local folder_path="$1"
-  if [ -d "$folder_path" ]; then
-    echo -e "${green}✓"
-  else
-    echo -e "${red}✗"
-  fi
-}
-
-function check_file_ke() {
-  local file_path="$1"
-  if [ -f "$file_path" ]; then
-    echo -e "${green}✓"
-  else
-    echo -e "${red}✗"
-  fi
-}
-
-function check_simplyprint_ke() {
-  if [ ! -f "$MOONRAKER_CFG" ]; then
-    echo -e "${red}✗"
-  elif grep -q "\[simplyprint\]" "$MOONRAKER_CFG"; then
-    echo -e "${green}✓"
-  else
-    echo -e "${red}✗"
-  fi
-}
-
-function info_menu_ui_ke() {
-  top_line
-  title '[ INFORMATION MENU ]' "${yellow}"
-  inner_line
-  hr
-  subtitle '•ESSENTIALS:'
-  info_line "$(check_folder_ke "$MOONRAKER_FOLDER")" 'Moonraker & Nginx'
-  info_line "$(check_folder_ke "$FLUIDD_FOLDER")" 'Fluidd'
-  info_line "$(check_folder_ke "$MAINSAIL_FOLDER")" 'Mainsail'
-  hr
-  subtitle '•UTILITIES:'
-  info_line "$(check_file_ke "$ENTWARE_FILE")" 'Entware'
-  info_line "$(check_file_ke "$KLIPPER_SHELL_FILE")" 'Klipper Gcode Shell Command'
-  hr
-  subtitle '•IMPROVEMENTS:'
-  info_line "$(check_folder_ke "$IMP_SHAPERS_FOLDER")" 'Improved Shapers Calibrations'
-  info_line "$(check_file_ke "$SAVE_ZOFFSET_FILE")" 'Save Z-Offset Macros'
-  info_line "$(check_file_ke "$GIT_BACKUP_FILE")" 'Git Backup'
-  hr
-  subtitle '•CAMERA:'
-  info_line "$(check_file_ke "$TIMELAPSE_FILE")" 'Moonraker Timelapse'
-  info_line "$(check_file_ke "$CAMERA_SETTINGS_FILE")" 'Nebula Camera Settings Control'
-  info_line "$(check_file_ke "$USB_CAMERA_FILE")" 'USB Camera Support'
-  hr
-  subtitle '•REMOTE ACCESS:'
-  info_line "$(check_folder_ke "$OCTOEVERYWHERE_FOLDER")" 'OctoEverywhere'
-  info_line "$(check_folder_ke "$MOONRAKER_OBICO_FOLDER")" 'Obico'
-  info_line "$(check_folder_ke "$GUPPYFLO_FOLDER")" 'GuppyFLO'
-  info_line "$(check_folder_ke "$MOBILERAKER_COMPANION_FOLDER")" 'Mobileraker Companion'
-  info_line "$(check_folder_ke "$OCTOAPP_COMPANION_FOLDER")" 'OctoApp Companion'
-  info_line "$(check_simplyprint_ke)" 'SimplyPrint'
-  hr
-  subtitle '•CUSTOMIZATION:'
-  info_line "$(check_file_ke "$CREALITY_WEB_FILE")" 'Creality Web Interface'
-  info_line "$(check_folder_ke "$GUPPY_SCREEN_FOLDER")" 'Guppy Screen'
-  info_line "$(check_file_ke "$FLUIDD_LOGO_FILE")" 'Creality Dynamic Logos for Fluidd'
-  hr
-  inner_line
-  hr
-  bottom_menu_option 'b' 'Back to [Main Menu]' "${yellow}"
-  bottom_menu_option 'q' 'Exit' "${darkred}"
-  hr
-  version_line "$(get_script_version)"
-  bottom_line
-}
-
-function info_menu_ke() {
-  clear
-  info_menu_ui_ke
-  local info_menu_opt
-  while true; do
-    read -p " ${white}Type your choice and validate with Enter: ${yellow}" info_menu_opt
-    case "${info_menu_opt}" in
-      B|b)
-        clear; main_menu; break;;
-      Q|q)
-         clear; exit 0;;
-      *)
-        error_msg "Please select a correct choice!";;
-    esac
-  done
-  info_menu_ke
-}
diff --git a/scripts/menu/main_menu.sh b/scripts/menu/main_menu.sh
index 79d4f5b..7c71771 100755
--- a/scripts/menu/main_menu.sh
+++ b/scripts/menu/main_menu.sh
@@ -85,8 +85,10 @@ function main_menu() {
            install_menu_k1
          elif [ "$model" = "3V3" ]; then
            install_menu_3v3
+         elif [ "$model" = "3KE" ]; then
+           install_menu_3ke
          else
-           install_menu_ke
+           install_menu_10se
          fi
          break;;
       2) clear
@@ -94,8 +96,10 @@ function main_menu() {
            remove_menu_k1
          elif [ "$model" = "3V3" ]; then
            remove_menu_3v3
+         elif [ "$model" = "3KE" ]; then
+           remove_menu_3ke
          else
-           remove_menu_ke
+           remove_menu_10se
          fi
          break;;
       3) clear
@@ -103,8 +107,10 @@ function main_menu() {
            customize_menu_k1
          elif [ "$model" = "3V3" ]; then
            customize_menu_3v3
+         elif [ "$model" = "3KE" ]; then
+           customize_menu_3ke
          else
-           customize_menu_ke
+           customize_menu_10se
          fi
          break;;
       4) clear
@@ -115,8 +121,10 @@ function main_menu() {
            tools_menu_k1
          elif [ "$model" = "3V3" ]; then
            tools_menu_3v3
+         elif [ "$model" = "3KE" ]; then
+           tools_menu_3ke
          else
-           tools_menu_ke
+           tools_menu_10se
          fi
          main_ui;;
       6) clear
@@ -124,8 +132,10 @@ function main_menu() {
            info_menu_k1
          elif [ "$model" = "3V3" ]; then
            info_menu_3v3
+         elif [ "$model" = "3KE" ]; then
+           info_menu_3ke
          else
-           info_menu_ke
+           info_menu_10se
          fi
          break;;
       7) clear
diff --git a/scripts/paths.sh b/scripts/paths.sh
index 1f5e465..785e935 100755
--- a/scripts/paths.sh
+++ b/scripts/paths.sh
@@ -115,6 +115,7 @@ function set_paths() {
   SCREWS_ADJUST_URL="${HS_FILES}/screws-tilt-adjust/screws_tilt_adjust.py"
   SCREWS_ADJUST_K1_URL="${HS_FILES}/screws-tilt-adjust/screws-tilt-adjust-k1.cfg"
   SCREWS_ADJUST_K1M_URL="${HS_FILES}/screws-tilt-adjust/screws-tilt-adjust-k1max.cfg"
+  SCREWS_ADJUST_3KE_URL="${HS_FILES}/screws-tilt-adjust/screws-tilt-adjust-3ke.cfg"
   
   # M600 Support #
   M600_SUPPORT_FILE="${HS_CONFIG_FOLDER}/M600-support.cfg"
diff --git a/scripts/screws_tilt_adjust.sh b/scripts/screws_tilt_adjust.sh
index 11e9ec0..d092b29 100755
--- a/scripts/screws_tilt_adjust.sh
+++ b/scripts/screws_tilt_adjust.sh
@@ -36,24 +36,29 @@ function install_screws_tilt_adjust(){
           mv "$KLIPPER_EXTRAS_FOLDER"/screws_tilt_adjust.pyc "$HS_BACKUP_FOLDER"/screws-tilt-adjust
         fi
         echo
-        local printer_choice
-        while true; do
-          read -p " ${white}Do you want install it for ${yellow}K1${white} or ${yellow}K1 Max${white}? (${yellow}k1${white}/${yellow}k1max${white}): ${yellow}" printer_choice
-          case "${printer_choice}" in
-            K1|k1)
-              echo -e "${white}"
-              echo -e "Info: Linking files..."
-              ln -sf "$SCREWS_ADJUST_K1_URL" "$HS_CONFIG_FOLDER"/screws-tilt-adjust.cfg
-              break;;
-            K1MAX|k1max)
-              echo -e "${white}"
-              echo -e "Info: Linking files..."
-              ln -sf "$SCREWS_ADJUST_K1M_URL" "$HS_CONFIG_FOLDER"/screws-tilt-adjust.cfg
-              break;;
-            *)
-              error_msg "Please select a correct choice!";;
-          esac
-        done
+        if [ "$model" = "K1" ]; then
+          local printer_choice
+          while true; do
+            read -p " ${white}Do you want install it for ${yellow}K1${white} or ${yellow}K1 Max${white}? (${yellow}k1${white}/${yellow}k1max${white}): ${yellow}" printer_choice
+            case "${printer_choice}" in
+              K1|k1)
+                echo -e "${white}"
+                echo -e "Info: Linking files..."
+                ln -sf "$SCREWS_ADJUST_K1_URL" "$HS_CONFIG_FOLDER"/screws-tilt-adjust.cfg
+                break;;
+              K1MAX|k1max)
+                echo -e "${white}"
+                echo -e "Info: Linking files..."
+                ln -sf "$SCREWS_ADJUST_K1M_URL" "$HS_CONFIG_FOLDER"/screws-tilt-adjust.cfg
+                break;;
+              *)
+                error_msg "Please select a correct choice!";;
+            esac
+          done
+        else
+          echo -e "Info: Linking files..."
+          ln -sf "$SCREWS_ADJUST_3KE_URL" "$HS_CONFIG_FOLDER"/screws-tilt-adjust.cfg
+        fi
         ln -sf "$SCREWS_ADJUST_URL" "$KLIPPER_EXTRAS_FOLDER"/screws_tilt_adjust.py
         if grep -q "include Helper-Script/screws-tilt-adjust" "$PRINTER_CFG" ; then
           echo -e "Info: Screws Tilt Adjust Support configurations are already enabled in printer.cfg file..."